Barrel Spring System (Ten (10) Barrel Springs and Ten (10) Spacers)
Barrel Springs are the most innovative compression spring design that the Zipline industry has seen. These compression springs will reduce the length of your arrival platforms. With slopes greater than six degrees, arrival speeds over 8-mph and maximum rider weight of 200 pounds will require additional spring packs. Testing is REQUIRED without riders mandatory. All zip lines are different and will need all non-conservative forces accounted for by a Professional Engineer. Speeds greater that 8 mph with maximum rider weight of 250 pounds will require additional springs and spacers. Momentum Engineering, LLC will calculate and estimate the number of springs and spacers needed with your first Barrel Spring System purchase for and additional $200. Email all questions to the below address
BEFORE A BARREL SPRING SYSTEMS WILL BE SENT OUT THE MANUAL WILL BE SENT TO THE PURCHASER. PLEASE REVIEW ALL PAGES SIGN AND EMAIL OR U.S. MAIL THE BARREL SPRING SYSTEMS MANUAL. INITIALS WILL BE REQUIRED FOR ALL PAGES. THEN SEND THE SCANNED BARREL SPRING SYSTEMS MANUAL TO:
MOMENTUM ENGINEERING, LLC.
733 NORTH SAGE CREEK CIRCLE
WASHINGTON, UTAH 84780
or for faster service SCAN AND EMAIL TO: firstname.lastname@example.org